ZyXEL Communications XGS2220 Series - 37.3 PoE Time Range Setup

Chapter 37 PoE Setup
XGS2220 Series User’s Guide
262
37.3 PoE Time Range Setup
Use this screen to apply a schedule to the ports on the Switch. You must first configure a schedule in the
SYSTEM > Time Range screen.
Figure 185 PORT > PoE Setup > PoE Time Range Setup
The following table describes the labels in this screen.
37.3.1 Add/Edit PoE Time Range
To access this screen, click the Add/Edit button or select an entry from the list and click the Add/Edit
button.
Figure 186 PORT > PoE Setup > PoE Time Range Setup > Add/Edit
Table 127 PORT > PoE Setup > PoE Time Range Setup
LABEL DESCRIPTION
Port This field displays the index number of the port. Click a port number to change the schedule
settings.
Time Range
Profiles
This field displays the name of the schedule which is applied to the port.
PoE is enabled at the specified time or date.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Add/Edit Click Add/Edit to add a new rule or edit a selected one.
Delete Check the rules that you want to remove and then click the Delete button.