Chapter 35 Link Layer Discovery Protocol (LLDP)
XGS2220 Series User’s Guide
228
Figure 163 LLDP-MED Overview
35.2.1 What You Can Do – LLDP
• Use the LLDP Local Status screen (Section 35.3 on page 228) to view the Switch’s LLDP information.
• Use the LLDP Remote Status screen (Section 35.4 on page 233) to view LLDP information from the
neighboring devices.
• Use the LLDP Setup screen (Section 35.5 on page 238) to configure LLDP on the Switch.
• Use the Basic TLV Setting screen (Section 35.6 on page 240) to configure basic TLV settings on each
port.
• Use the Org-specific TLV Setting screen (Section 35.7 on page 241) to configure organization-specific
TLV settings on each port.
35.2.2 What You Can Do – LLDP MED
• Use the LLDP-MED Setup screen (Section 35.8 on page 242) to configure LLDP-MED (Link Layer
Discovery Protocol for Media Endpoint Devices) parameters.
• Use the LLDP-MED Network Policy screen (Section 35.9 on page 243) to configure LLDP-MED (Link
Layer Discovery Protocol for Media Endpoint Devices) network policy parameters.
• Use the LLDP-MED Location screen (Section 35.10 on page 245) to configure LLDP-MED (Link Layer
Discovery Protocol for Media Endpoint Devices) location parameters.
35.3 LLDP Local Status
This screen displays a summary of LLDP status on this Switch. Click PORT > LLDP > LLDP > LLDP Local Status
to display the screen as shown next.
To Next Page
Loading...
