ZyXEL Communications XGS2220 Series - OAM Details

Chapter 36 OAM
XGS2220 Series User’s Guide
249
Figure 178 PORT > OAM > OAM Status
The following table describes the fields in the above screen.
36.2.1 OAM Details
Use this screen to view OAM configuration details and operational status of a specific port. Click an
number in the Port column in the PORT > OAM > OAM Status screen to display the screen as shown next.
Table 121 PORT > OAM > OAM Status
LABEL DESCRIPTION
Local
This section displays information about the ports on the Switch.
Port This field displays the port number.
Mode This field displays the operational state of the port when OAM is enabled on the port.
Active – Allows the port to issue and respond to Ethernet OAM commands.
Passive – Allows the port to respond to Ethernet OAM commands.
Remote
This section displays information about the remote device.
Mac Address This field displays the MAC address of the remote device.
OUI This field displays the OUI (first 3 bytes of the MAC address) of the remote device.
Mode This field displays the operational state of the port when OAM is enabled on the port.
Active – Allows the port to issue and respond to Ethernet OAM commands.
Passive – Allows the port to respond to Ethernet OAM commands.
Config This field displays the capabilities of the Switch and remote device.