Chapter 79 Networked AV Mode
XGS2220 Series User’s Guide
561
• Use the SNMP screen (Section 79.13 on page 569) to configure your SNMP (Simple Network
Management Protocol) settings.
• Use the SNMP User screen (Section 79.14 on page 571) to create SNMP users for authentication with
managers using SNMP v3 and associate them to SNMP groups.
• Use the SNMP Trap Group screen (Section 79.15 on page 573) to specify the types of SNMP traps that
should be sent to each SNMP manager.
• Use the SNMP Trap Port screen (Section 79.16 on page 574) to set whether a trap received on the
ports would be sent to the SNMP manager.
79.9 Cloud Management
The Zyxel Nebula Control Center (NCC) is a cloud-based network management system that allows you
to remotely manage and monitor Zyxel Nebula APs, Ethernet switches and security gateways.
The Switch is managed and provisioned automatically by the NCC (Nebula Control Center) when:
• It is connected to the Internet.
• The Nebula Control Center Discovery feature is enabled.
• It has been registered in the NCC.
Click SYSTEM > Cloud Management in the navigation panel to display this screen.
To Next Page
Loading...
