ZyXEL Communications XGS2220 Series - Page 441

Chapter 65 AAA
XGS2220 Series User’s Guide
441
65.5.4.3 Attributes Used for Accounting IEEE 802.1x Events
The attributes are listed in the following table along with the time of the session they are sent:
Acct-Session-Time

Acct-Terminate-Cause

Table 251 RADIUS Attributes – Exec Events through Telnet/SSH
ATTRIBUTE START INTERIM-UPDATE STOP
User-Name
 
NAS-Identifier
 
NAS-IP-Address
 
Service-Type
 
Calling-Station-Id
 
Acct-Status-Type
 
Acct-Delay-Time
 
Acct-Session-Id
 
Acct-Authentic
 
Acct-Session-Time

Acct-Terminate-Cause

Table 250 RADIUS Attributes – Exec Events through Console (continued)
ATTRIBUTE START INTERIM-UPDATE STOP
Table 252 RADIUS Attributes – Exec Events through Console
ATTRIBUTE START INTERIM-UPDATE STOP
User-Name
 
NAS-IP-Address
 
NAS-Port
 
Class
 
Called-Station-Id
 
Calling-Station-Id
 
NAS-Identifier
 
NAS-Port-Type
 
Acct-Status-Type
 
Acct-Delay-Time
 
Acct-Session-Id
 
Acct-Authentic
 
Acct-Input-Octets

Acct-Output-Octets

Acct-Session-Time

Acct-Input-Packets
