Chapter 68 Policy Rule
XGS2220 Series User’s Guide
464
Figure 342 SECURITY > ACL > Policy Rule > Add/Edit
The following table describes the labels in this screen.
Table 264 SECURITY > ACL > Policy Rule > Add/Edit
LABEL DESCRIPTION
Source & Destination
Active Enable the switch button to enable the policy.
Name Enter a descriptive name for identification purposes. You can enter up to 32 printable ASCII
characters except [ ? ], [ | ], [ ' ], [ " ] or [ , ].
Classifier(s) This field displays the active classifiers you configure in the SECURITY > ACL > Classifier >
Classifier Setup screen.
Select the classifiers to which this policy rule applies. To select more than one classifier, press
[SHIFT] and select the choices at the same time.
To Next Page
Loading...
