ZyXEL Communications XGS2220 Series - Page 54

Chapter 3 Hardware Panels
XGS2220 Series User’s Guide
54
LED COLOR STATUS DESCRIPTION
10M/100M/1000M Base-T Ports
Link / ACT
1 – 24
(XGS2220-30 /
XGS2220-30HP)
1 – 48
(XGS2220-54 /
XGS2220-54HP /
XGS2220-54FP)
Green On The link to a 1000M Ethernet network is up.
Blinking The Switch is transmitting/receiving to/from a 1000M Ethernet
network.
Yellow On The link to a 10M/100M Ethernet network is up.
Blinking The Switch is transmitting/receiving to/from a 10M/100M
Ethernet network.
Off The link to an Ethernet network is down.
1G/2.5G/5G/10G Base-T Ports
Link / ACT
25 – 26
(XGS2220-30 /
XGS2220-30HP /
XGS2220-30F)
49 – 50
(XGS2220-54 /
XGS2220-54HP /
XGS2220-54FP)
Blue On The link to a 10G Ethernet network is up.
Blinking The Switch is transmitting/receiving to/from a 10G Ethernet
network.
Green On The link to a 1G/2.5G/5G Ethernet network is up.
Blinking The Switch is transmitting/receiving to/from a 1G/2.5G/5G
Ethernet network.
Off The link to an Ethernet network is down.
PoE Mode
1 – 16
(XGS2220-30HP)
1 – 40
(XGS2220-54HP /
XGS2220-54FP)
Green On Power supplied to all PoE Ethernet ports meets the IEEE 802.3at
or IEEE 802.3af standard.
Off There is no power supplied.
17 – 26
(XGS2220-30HP)
41 – 50
(XGS2220-54HP /
XGS2220-54FP)
Yellow On Power supplied to all PoE Ethernet ports meets the IEEE 802.3bt
standard.
Green On Power supplied to all PoE Ethernet ports meets the IEEE 802.3at
/ IEEE 802.3af standards.
Off There is no power supplied.