Chapter 4 Web Configurator
XGS2220 Series User’s Guide
60
Figure 36 Web Configurator: Wizard
10 If you did not change the default administrator password and/or SNMP community values, a warning
screen displays each time you log into the Web Configurator and select Standard Mode. Click Password
/ SNMP to open a screen where you can change the administrator password and SNMP community
string simultaneously. Otherwise, click Ignore to close it.
If you log into the Web Configurator and select Networked AV Mode, open the screen in the Wizard >
Step 2 Password to change the administrator password and SNMP community string. Click Finish on the
last step of the Wizard to save your settings.
Password/SNMP Setting
Figure 37 Web Configurator: Warning
To Next Page
Loading...
