ZyXEL Communications ZyWALL USG 100 Series - Page 974

Appendix A Log Descriptions
ZyWALL USG 100/200 Series User’s Guide
974
Update the profile %s
has failed because the
feature requested is
only available to
donators.
Update profile failed because the feature requested is only
available to donators, %s is the profile name.
Update the profile %s
has failed because of
error response.
Update profile failed because the response is incorrect, %s is
the profile name.
Update the profile %s
has failed because %s.
Update profile failed, and show the response message, 1st
%s is the profile name, 2nd %s is the reason.
Update the profile %s
has failed because of
unknown error.
Update profile failed because unknown error. Sometimes, the
force authentication will result in this error, 1st %s is the
profile name.
Update the profile %s
has failed because
Username was empty.
DDNS profile needs username, %s is the profile name.
Update the profile %s
has failed because
Password was empty.
DDNS profile needs password, %s is the profile name.
Update the profile %s
has failed because
Domain name was empty.
DDNS profile needs domain name, %s is the profile name.
Update the profile %s
has failed because
Custom IP was empty.
The DDNS profile's IP select type is custom, and a custom IP
was not defined, %s is the profile name.
Update the profile %s
has failed because WAN
interface was empty.
If the DDNS profile's IP select type is iface, it needs a WAN
iface, %s is the profile name.
The profile %s has
been paused because
the VRRP status of WAN
interface was standby.
The profile is paused by device-HA, because the VRRP status
of that iface is standby, %s is the profile name.
Update the profile %s
has failed because WAN
interface was link-
down.
DDNS profile cannot be updated for WAN IP because WAN
iface is link-down, %s is the profile name.
Update the profile %s
has failed because WAN
interface was not
connected.
DDNS profile cannot be updated for WAN IP because WAN
iface is PPP and not connected, %s is the profile name.
Update the profile %s
has failed because IP
address of WAN
interface was empty.
DDNS profile cannot be updated because the IP of WAN iface
is 0.0.0.0, 1st %s is the profile name.
Update the profile %s
has failed because
ping-check of WAN
interface has failed.
DDNS profile cannot be updated because the ping-check for
WAN iface failed , %s is the profile name.
Table 294 System Logs (continued)
LOG MESSAGE DESCRIPTION