Appendix A Log Descriptions
ZyWALL USG 100/200 Series User’s Guide
975
The profile %s has
been paused because
the HA interface of
VRRP status was
standby.
The profile is paused by Device-HA, because the VRRP status
of that HA iface is standby, %s is the profile name.
Update the profile %s
has failed because HA
interface was link-
down.
DDNS profile cannot be updated for HA IP address because
HA iface is link-down, %s is the profile name.
Update the profile %s
has failed because the
HA interface was not
connected.
DDNS profile cannot be updated for HA IP address because
HA iface is PPP and not connected, %s is the profile name.
Update the profile %s
has failed because IP
address of HA
interface was empty.
DDNS profile cannot be updated because the IP address of HA
iface is 0.0.0.0, %s is the profile name.
Update the profile %s
has failed because
ping-check of HA
interface has failed.
DDNS profile cannot be updated because the fail of ping-
check for HA iface, %s is the profile name
DDNS has been disabled
by Device-HA.
DDNS is disabled by Device-HA, because all VRRP groups are
standby.
DDNS has been enabled
by Device-HA.
DDNS is enabled by Device-HA, because one of VRRP groups
is active.
Disable DDNS has
succeeded.
Disable DDNS.
Enable DDNS has
succeeded.
Enable DDNS.
DDNS profile %s has
been renamed as %s.
Rename DDNS profile, 1st %s is the original profile name,
2nd %s is the new profile name.
DDNS profile %s has
been deleted.
Delete DDNS profile, %s is the profile name,
DDNS Initialization
has failed.
Initialize DDNS failed,
All DDNS profiles are
deleted
All DDNS profiles have been removed.
Collect Diagnostic
Information has failed
- Server did not
respond.
There was an error and the diagnostics were not completed.
Collect Diagnostic
Infomation has
succeeded.
The diagnostics scripts were executed successfully.
Port %d is up!! The specified port has it’s link up.
Port %d is down!! The specified port has it’s link down.
Table 294 System Logs (continued)
LOG MESSAGE DESCRIPTION
To Next Page
Loading...
