Pannoramic 250 1.15 User’s Guide 4 Software Description
You can also define names for the slides in the table, by entering names into the column
Names / Barcodes. You can also define profiles in the selection boxes in column Profiles if
you intend to use different profiles for slides.
Current Profile is the profile loaded in Routine Work / Scan Profiles.
• Save Names and Profiles to File
By clicking the button, you can save the entered names and
assigned profiles. You can define a name before saving. The information will be saved in a
CSV format:
1;<slide position>,<slide name>,<profile name>
You can export this information into Excel where you can change the data and save it again
in CSV format.
• Load Names and Profiles from File
You can import previously saved names and assigned profiles by clicking
.
• Delete Names and Profiles
You can delete all entries from the table by clicking .
March 13, 2012 – Rev. 1 3DHISTECH Ltd.
104(135)
To Next Page
Loading...
