Pannoramic 250 1.15 User’s Guide 4 Software Description
4.8 Using Profiles
Note:
Saved profile settings cannot be transferred to and used on another
control computer.
If you want to scan a group of slides, it is advised to save your settings previously in a profile and
continue scanning in Automatic mode. You can save the following settings in a profile:
Scan Mode
• Brightfield
• Fluorescent
Scan Options
• Focus frequency (present in Fluorescent mode)
• Interpolated Focus distance (present in Brightfield mode)
• Compression procedure
• Use of a fixed compensation image (ON/OFF)
• Use of stitching (ON/OFF)
Determination of the area to be scanned
• Use of automatic threshold specimen
• Use of specimen threshold value
• Use of Brightfield/Darkfield preview image
• Use of marker pen threshold and specimen threshold values
• Use of scan everything within marked area (ON/OFF)
• Remove coverslip function (ON/OFF)
• Filling of holes (ON/OFF)
• Use of removing specks according to the set value (ON/OFF)
March 13, 2012 – Rev. 1 3DHISTECH Ltd.
113(135)
To Next Page
