Pannoramic 250 1.15 User’s Guide
Notes on Warranty
3DHISTECH Ltd. – as the Product Manufacturer – warrants the Pannoramic 250 to be free from faults
in material and workmanship at the moment of installation. Defects must be notified immediately on
identification and maximum efforts must be undertaken in order to the amount of damage as small
as possible. On receiving notice of a fault, the Product Manufacturer will be under obligation to
remove the fault, at his own option, either by providing adequate repair services or by delivering a
faultless product for replacement. No warranty will be accepted in cases of natural wear (notably,
wear and tear parts) or improper product handling.
The Product Manufacturer will refuse any liability in the event of damage resulting from faulty
operation, negligence or unauthorized intervention into the product, notably, from the replacement
of product parts or the usage of accessory parts from other manufacturers. Any such case will void
the user’s claim for warranty.
Except for action which is explicitly described in this User’s Guide, you are prohibited from
performing any kind of maintenance or repair work at the Pannoramic 250. Only 3DHISTECH Service
personnel or specifically authorized representatives are allowed to handle repair work. In case of
malfunction, contact the 3DHISTECH Service Support first.
March 13, 2012 – Rev. 1 3DHISTECH Ltd. 10(135)
To Next Page
Loading...
