3DHISTECH Pannoramic 250 - Connectors and Cables

Pannoramic 250 1.15 User’s Guide 2 Installation
1. Status display
2. DVD drive (RW)
3. Power on/off button
4. Earphone and microphone 3.5mm Jack ports
5. 2x USB port
6. Power supply connector
7. PS/2 mouse port
8. PS/2 keyboard port
9. 4x USB port
10. 2x USB port
11. Network port
12. Matrox Solios CameraLink ports (for CIS camera)
13. Matrox Solios CameraLink ports (for pco.edge camera)
14. 1x FireWire port (IEEE 1394 A/B, for AxioCam MRm Rev3 camera)
2.2 Connectors and cables
• Control – USB (between scanner and control computer)
• Preview camera – USB cable (between preview camera and control computer)
• AxioCam – FireWire 1394 A cable (between AxioCam camera and control computer)
• CIS – a pair of CameraLink cables (between CIS camera and control computer)
• pco.edge – a pair of CameraLink cables (between pco.edge camera and control computer)
• Video cable (between monitor and control computer)
• Power supply cable (between 230V/110V and monitor)
• Power supply cable (between 230V/110V and control computer)
• Power supply cable (between 230V/110V and Pannoramic 250 main unit)
• Optical cable (between HXP 120 fluorescent illuminator and scanner)
• Trigger cable (between AxioCam and HXP 120 fluorescent illuminator)
• Trigger cable (between pco.edge and Lumencor fluorescent illuminator)
• USB-to-RS232 serial communication cable (between Lumencor fluorescent illuminator and
control computer)
• Power supply cable (between 230V/110V and HXP 120 fluorescent illuminator)
March 13, 2012 – Rev. 1 3DHISTECH Ltd.
24(135)