Pannoramic 250 1.15 User’s Guide 4 Software Description
• Use saved scan area
• Use selection box (ON/OFF)
Fluorescent settings
• Filter position(s)
• Selected focus channel
• Selected stitching channel
• Use of skip empty field-of-views (ON/OFF)
• Do not use extended focus on empty field-of-views (ON/OFF)
• Selected image bit depth
Other settings
• Limitation of focus range (ON/OFF)
• Use of extended focus or Z-stack step size and focus level
• Use of objective position
• Enable/disable Multilayer options (present in Fluorescent mode)
March 13, 2012 – Rev. 1 3DHISTECH Ltd.
114(135)
To Next Page
