3DHISTECH Pannoramic 250 - Page 70

Pannoramic 250 1.15 User’s Guide 4 Software Description
To administer profiles, use the Scan Profiles field.
• The current profile name is displayed at the bottom left corner of the screen.
• To save the current profile, click Save.
• To select an existing profile from the selection menu, click Load.
• You can delete the current profile by clicking Delete.
To access the Scan Options window, click .
Note:
These settings are only applicable if you do not use profiles. If you use
profiles, the settings stored in them are used. The used profile name is
indicated at the bottom left of the main window.
For more information, see section 4.3.2 Scan Options window.
March 13, 2012 – Rev. 1 3DHISTECH Ltd.
70(135)