3M 965DSP - Set Clock

12
Set Beep
Use the Set Beep setup to turn the key beeps on or off.
Use the [Tab] key to toggle between on or off. Use
the [Enter] key to return.
Set Clock
Use the Set Clock setup to change the date and time.
Use the [Tab] key to select either the date, time, or
a.m./p.m. Use the [Left] and [Right] keys to select
the digit to change. Use the blue keys to enter the
values. Use the [Up] and [Down] keys to select
a.m. or p.m. Use [Enter] to accept the changes and
return. Use [Return] to return to the Welcome Screen
without making changes.