3M 965DSP User Manual

47
K-Test Error: R1<2*R2
The 965DSP checks to see that the fault on the
green lead is at least twice the value of the fault on
the red lead. This screen indicates that the ratio of
the faults is too low.
Press [Enter] to return to the initial “K-Test Hookup:
Open Far-End” screen. You may also elect to
go to the Resistance function and re-measure the
resistances before repeating the K-Test.

3M 965DSP Specifications

General

Brand	3M
Model	965DSP
Category	Measuring Instruments
Language	English