4
Out of the Box
What you will find when you unpack the shipping box:
• 3M
™
Dynatel
™
965DSP Series Subscriber Loop
Analyzer
• Carrying case
• NiMH battery pack (inside the 965DSP)
• Spare battery holder
• Test Leads (red/black pair, blue/yellow pair, green)
• Shorting strap
• AC charger
• Power cord
• Instruction manual
• Quick card and Warranty card
• Self-test board
Visually inspect all components. If any component
is missing or appears damaged, do not install and
call customer service at 1-800-426-8688 for a
replacement product.
The Dynatel 965DSP comes in the carrying case and
should remain in the case to give extra protection
from shock and the environment.
A NiMH battery pack is already installed in the
965DSP. You may need to charge the battery before
using the unit. Please see Care and Maintenance
section. The Spare Battery Holder holds six “AA”
alkaline batteries and should only be used if the
NiMH battery pack is discharged.
The 965DSP comes with 5 test leads: red/black,
blue/yellow and green. The Shorting Strap is only
used in RFL mode.
The AC charger will convert 110 or 220 Vac into
the 12 Vdc used for charging the 965DSP. A North
American 110 Vac Power Cord is provided with
the unit. The AC charger is meant for charging
the NiMH battery pack only. Do not use the AC
charger to power the 965DSP during normal
operations.
Additional information is also found in the 965DSP
help screens. For Technical Service, Warranty or
Repair questions call: 800 426 8688 in the US or
Canada, or contact your local 3M Representative.
Communication Markets Division
3M Telecommunicat
ions
6801 River Place Blvd.
Austin, TX 78726-9000 USA
To Next Page
Loading...
