84
Edit the Tech ID and Job Number using the
same procedure described previously. Up to
14 alphanumeric characters can be entered in
each field. Use the [Tab] key to jump between
highlighted boxes. Use the [Setup] key to clear
both fields. The data entered into each field will
remain present for every saved result until explicitly
changed or cleared. In this way information that is
infrequently changed (Tech ID for instance) does
not need to be re-keyed every time. These two fields
are appended to the ADSL Results when they are
printed or stored in PCLink.
At least 40 ADSL test results can be saved. The
percentage of remaining memory for results storage
is shown in the box at the top of the screen. The
number of saved TDR or Autotest results does not
impact the number of ADSL results that can be
saved.
ADSL Warning Screens
ADSL warning screens are intended as informational
aids and provide additional explanatory data. Warning
screens can be categorized into four groups: modem
information, link activation failures, connection lost,
and timeouts.
To Next Page
Loading...
Need help?
General
