8
Welcome Screen
This is the screen that you see when you first turn
on the 965DSP. It shows the model name, installed
options, serial number, copyright year, software
version, and the selected country. The battery symbol
in the upper right-hand corner of the display gives an
indication of the approximate battery capacity. Each
bar represents one-quarter of the full capacity. If
the spare battery holder with the alkaline batteries
is installed in place of the NiMH battery pack, the
battery level will not be monitored and the battery
symbol will not be visible in the display.
Control Keys
Press [Setup] to go to the general setup screen from
the Welcome screen.
Use the [Up] and [Down] keys to highlight a menu
item: Country, Language, Units, Clock Format, Set
Clock, Set Beep, Autotest Limits, Printer, Power Down
Timeout, Edit Wire Gauge, Voltage Termination or User
Info. Press the [Enter] key to select the highlighted item.
Use [Return] to return to the Welcome Screen without
making changes.
To Next Page
Loading...
