3M 965DSP - Talk Set Setup

136
Use the blue keys to change the number.
Use the [Tab] key to highlight a desired menu. Use
the [Up] and [Down] arrow keys to move to a desired
telephone number, select the dial mode (DTMF or
Pulse), and the start mode (Loop or Ground). Use
the [Enter] key to accept the choice and return to the
previous screen. For any number highlighted, press
the [Setup] key to edit the number.
Talk Set Setup
Press the [Setup] key to access the telephone
number directory.
Press the [Enter] key to accept the changes and
return to the previous screen. Use the [Return] key
to exit without making changes.
Use the following keys when editing numbers:
Use or to insert a space to the left of the cursor.
Use to delete the character above the cursor.
Use to insert a ‘dash’ at the cursor point.