3M 965DSP - Autotests with FED

115
Autotests with a FED
The 965DSP will perform an Inactive or Wideband
Autotest with a FED, FED II or SmartStrap
™. From
the Auto Menu screen, press the [Tab] key to go to
the FED setup screen.
None FED FED II SmartStrap
™
Inactive Yes Yes Yes Yes
Active Yes No No No
Wideband No Yes Yes Yes
Use the [Up] and [Down] keys to select a 3M FED, 3M
FED II, or the CTC Smart Strap
™
.
If a CTC Smart Strap is selected, you must also enter
the pair number to be tested. Use the [Tab] key to
highlight the Test Pair number box. Use the blue
keys to enter the desired test pair number. Press the
[Enter] key to accept the choice and return to the
Auto Menu.