6
Control Keys
Use the red and yellow keys to control the actions and
the setup of the 965DSP and its functions. The active
control keys for each function are shown at the bottom
of the corresponding 965DSP screen.
Use the [Return] key to return to a
previous step in a function.
Use the [Contrast] key to adjust the
contrast or to turn the backlight on or off.
Use the [Save] key for saving Autotest results,
Single Trace TDR waveforms, and ADSL
Modem link information (/ADSL option only).
Use the [On/Off] key to turn the 965DSP
on or off (see also “Power Down Timeout”
on page 16)
Use the [Tab] key to select between
different options.
Use the [Setup] key to change the setup of
any function.
Use the [Help] key to get help with any
screen.
Use the [Enter] key to accept changes or
move to the next step in a function.
Use the [Up] and [Down] keys to
scroll to different menu options or
insert and delete characters when
editing.
Use the [Left] and [Right] keys to
move between different options or
move the TDR cursor.
Editing
Use the following keys when editing:
Use to insert a space to the left of the cursor.
Use to delete the character above the cursor.
Use to add a ‘dash’ in a telephone number or a
minus sign for signal levels or temperature.
Use to add one second delay for dialing.
To Next Page
Loading...
