76
minimum acceptable data rate for the service grade
in the Rate field. Capacity is the ratio of the actual
connect rate to the maximum rate that the line can
support. Larger capacity values indicate less noise
margin and lower tolerance for line disturbances. This
parameter can be used to guarantee some reserve
performance capability. The line capacity in each
direction has to be less than or equal to the value in
the corresponding Capacity field to pass. Enter the
maximum acceptable capacity in the Capacity field.
Use the [TAB] key to move between fields and the
numeric keypad to enter values. Use the Restore
Defaults key to restore the Factory default values.
ADSL Self Test
Use this feature to run a self test on the internal
ADSL modem in the 965DSP. No external
connections are required. The result of the self
test and the version number of the internal modem
software are displayed. Press the ReTest key to
repeat the self test.The internal ADSL modem may
still function if the self test fails, but performance
could be degraded. Contact 3M Technical Service
for assistance.
To Next Page
Loading...
