3M™ Wireless Communication System Model XT-1
Store Manager Operating Instructions
November 2011 - Revision 1.8
Page 8 of 65
Configuration
Setting If Peer-to-Peer If Private Network
IP Address
Base Station 192.168.99.2
192.168.0.110
(or another unused address in the same
address space as the DHCP address)
PC 192.168.99.1 DHCP
Subnet mask
Base Station 255.255.255.0 255.255.255.0
PC 255.255.255.0 No requirement
Default Gateway
Base Station 192.168.99.1
192.168.0.1
(or the switch,router, or hub address)
PC Leave blank
192.168.0.1
(or the switch,router, or hub address)
E-mail server: 192.28.32.161
Your E-mail address suffix: mmm.com
Logging into the Base Station with a PC
Once the base station is connected and configured you can log into it from any other
computer on the network and operate the station as you would from the local interface.
To log into the base station:
• Usingawebbrowser,typeintheIPaddressofthebasestationinthebrowser’s
Address bar, then press Enter.
• Typeinyourusernameandpassword,thenpressEnter.
• Thedefaultusernameis“User1”;thedefaultpasswordis“1234”
• DoNOTtypethespacebetweenUserandtheuser
number (e.g., type “User5” instead of “User 5”).
• Ifthepasswordhasbeenchanged,youcanloginusing
the base station to find out what it is (
13 Change Passcodes >
Change User Passcodes
, then look at the current code).
Change Basic Volume Settings
Note:
All volume settings should be adjusted during normal or peak business hours.
Adjusting them during slow times will likely produce volume settings that are too low.
Note:
Inbound and outbound are always defined from the perspective of the headset.
Inbound Microphone Volume
Changing the inbound microphone volume affects the sound volume
coming from the customer order point microphone.
To turn up or down the inbound microphone:
• Enterthecongurationmode,seepage5.
• Selectanewvaluefor
01 Drivethru Volume
>
Inbound
Mic Volume
. The range is 0 (silent) to 20 (maximum).