3M XT-1 - System Configuration; Viewing Time Reports

3M™ Wireless Communication System Model XT-1
Store Manager Operating Instructions
November 2011 - Revision 1.8
Page 64 of 65
Appendix: Timer Module
System Configuration
As mentioned previously, the system configuration field is used to apply one of a
fewprovideddrive-thrutemplatesmostcloselymatchingeachstore’srequirements.
The following are modified when a configuration is selected.
 • CustomNames
  • ReportGroups
  • TimerGoals
  • RemoteDisplaySettings
Viewing Time Reports
The main timer screen shows you the time reports configured for your system.
>Jun/16/2010<|< Breakfast >|<Day Part>h
Lane 1 |06:00 to 10:30|Total=117
Except = 0015|AVG.|GOAL|OVER|Attained
OrderPoint1 |1:25|1:00|0031|079.05% i
Following is a definition of the items on the above screen:
>JUN/16/2010<
The date selected for the report data.
The timer system shows, at a maximum,
the last 7 days of data available.
< Breakfast >
The time period report sub-type. The custom names
that appear are user-specified during configuration.
<Day Part>
The time period report type. This can be Full
Day, Day Part, Shift, Hour, or OneEvent
Lane 1
The report group name. The report groups
names are user-specified. A typical use for group
names is to separate one drive through lane
from another (e.g., “Lane 1” and “Lane 2).
06:00 to 10:30
The time slot for the day part you are
currently viewing (in this case Breakfast).