3M XT-1 - Inbound Listen; Outbound Talk; Vehicle Present

3M™ Wireless Communication System Model XT-1
Store Manager Operating Instructions
November 2011 - Revision 1.8
Page 10 of 65
Configuration
Inbound Listen
Changing the inbound listen volume affects how loudly the monitor plays the inbound (customer
order point) communication. You can also disable the monitor playing inbound sounds.
To change the inbound listen monitoring settings:
 • Enterthecongurationmode,seepage5.
 • Select 02 Monitor Volume .
 • Toenableordisablethemonitorplayingtheinboundsounds,change
the value for Inbound Listen: Enable to ON or OFF .
 • Tochangethevolumelevel,selectanewvaluefor Inbound Listen :
Volume . The range is 0 (silent) to 20 (maximum).
Outbound Talk
Changing the outbound talk volume affects how loudly the monitor plays the outbound (order
taker) communication. You can also disable the monitor playing outbound talk.
Note:
To avoid feedback and echo, set the outbound talk volume as low as possible.
To change the outbound talk monitoring settings:
 • Enterthecongurationmode,seepage5.
 • Select 02 Monitor Volume .
 • Toenableordisablethemonitorplayingtheoutboundtalk,changethe
value for Outbound Talk: Enable to ON or OFF .
 • Tochangethevolumelevel,selectanewvaluefor Outbound Talk:
Volume . The range is 0 (silent) to 20 (maximum).
Vehicle Present
Changing the vehicle present volume affects how loudly the monitor plays the vehicle
present tone. You can also disable the monitor playing the vehicle present tone.
To change the vehicle present monitoring settings:
 • Enterthecongurationmode,seepage5.
 • Select 02 Monitor Volume .
 • Toenableordisablethemonitorplayingthevehiclepresenttone,change
the value for Vehicle Present: Enable to ON or OFF .
 • Tochangethevolumelevel,selectanewvaluefor Vehicle Present:
Volume . The range is 0 (silent) to 20 (maximum).