3M XT-1 - Site Scheduling and Information

3M™ Wireless Communication System Model XT-1
Store Manager Operating Instructions
November 2011 - Revision 1.8
Page 20 of 65
Configuration
Change Site Scheduling
The site schedule is the calendar of store open and closing times.
Note:
All timekeeping is done using a 24 hour clock (e.g., 6:00 p.m. appears as 18:00).
Regular Site Schedule
The regular site schedule is the opening and closing times for each day of the week and the times
assigned as “Day” and “Night”, which determine when the day and night volume settings change.
Perform the following procedure to set the regular site schedule:
 • Enterthebasestationcongurationmode,seepage5.
 • Navigateto 10 Site Scheduling > Regular Site Schedule .
 • Changethevalueforeachdayoftheweekandeachofthefour
defined fields ( Open , Day , Night , and Close ).
(Press 5 , 6 , 3 and 4 to scroll up and down the list).
Note:
The greeter will not play messages while the store is closed, except for the
(built-in or custom) store closed message.
Holiday/Exception Schedule
The holiday/exception schedule can be used to identify up to 12 days in the year on which the
store schedule is different than it would have been otherwise. The holiday/exception schedule
shouldbeupdatedatleastonceayeartoensureitconformstothecurrentyear’scalendar.
Perform the following procedure to set the holiday/exception schedule:
 • Enterthebasestationcongurationmode,seepage5.
 • Navigateto 10 Site Scheduling .> Holiday/Exception Schedule .
 • Foreachdaythatneedsanon-typicalschedule,enterthethree-lettermonthandtwodigit
date under Date, then change the open and close times on the line to the right of the date.
(Press 5 , 6 , 3 and 4 to scroll through the fields.)