3M XT-1 - Timer System Configuration and Customization

3M™ Wireless Communication System Model XT-1
Store Manager Operating Instructions
November 2011 - Revision 1.8
Page 51 of 65
Appendix: Greeter Module
Dual Lane Systems - Lane 2
In a dual lane system, the headsets are programmed to the Lane 1 base station, so
settings pertaining to headsets are absent from the Lane 2 base station.
The following menu choices are available.
 4. Message Activation
5. Record Messages
 6. Message Daypart Denitions
7. Greeter Message Properties
8. Message Names
All menus are the same, with the exception of Greeter Message Properties,
adding the Tandem Pull Forward message setting.
:GREETER MESSAGE PROPERTIES: h
External Detector Playback Message > OFF <
Tandem Pull Ahead Playback Message > OFF <
Greeter Revision <03>
Tandem Pull Ahead Playback Message
You can assign a custom message to be played to customers at the Lane 2 order point when the Lane 1
order point is available to pull forward. The custom message must be recorded as Type FORWARD.
To select which pull ahead playback message is chosen:
9. Navigate to Tandem Pull Ahead Playback Message .
10. Change the value of the playback setting. Your choices are:
• OFF - The factory provided “Pull Forward” message is used.
  • ON - The custom recorded FORWARD message is used.