3M XT-1 - Drive Thru Audio Duplex Mode; Page Channel Heard by Order Taker; Number of Base Stations at this Site

3M™ Wireless Communication System Model XT-1
Store Manager Operating Instructions
November 2011 - Revision 1.8
Page 15 of 65
Configuration
Perform the following procedure to change the text and audio prompts:
 • Enterthebasestationcongurationmode,seepage5.
 • Changethevaluefor
07 Global Settings > Text & Audio Prompts
Language to English , Español , Deutsch , or Francais .
Drive Thru Audio Duplex Mode
The system can function using half duplex or full duplex modes. Choosing
between the two modes is based upon the desired operation.
Note:
In half duplex installations, all latching order taking modes and hands free mode are disabled.
Perform the following procedure to change the drive through audio mode:
 • Enterthebasestationcongurationmode,seepage5.
 • Changethevaluefor 07 Global Settings > DriveThru
Audio Duplex Mode to Full or Half .
  • Inhalf-duplex systems, when the order taker is speaking, it is impossible
to hear any speech coming from the customer order point.
  • Infull-duplex systems, the order taker can speak and hear speech
coming from the customer order point at the same time.
2o enable or disable the order taker hearing pages while talking:
 • Enterthebasestationcongurationmode,seepage5.
 • Select 07 Global Settings .
 • Toenableordisablethemonitorplayingtheoutboundtalk,changethevalue
for PAGE Channel Heard by Order Taker : to NO or YES .
Number of Base Stations at this Site
When there are two base stations used together (tandem, dual, or side-by-
side drive thrus) they must be configured to work together.
Perform the following procedure to enable the two stations to work together:
On the first base station:
 • Enterthebasestationcongurationmode,seepage5.
 • Changethevaluefor 07 Global Settings > Number
of BaseStations at This Site to 2 .
 • PressEnter to implement the change.
 • Ontherstbasestation,stations,changethevaluefor 07 Global
Settings > Lane Number of This Base Station to 1 .