3M XT-1 - Time Reports and Threshold Settings

3M™ Wireless Communication System Model XT-1
Store Manager Operating Instructions
November 2011 - Revision 1.8
Page 58 of 65
Appendix: Timer Module
Report Group Names
Perform the following procedure to change the Report Group Names:
2. Enter the timer configuration menu, see above.
 • Select 4 Customize Names > 2 Report Group Names .
You can define custom report group names to make it easier to associate events with each other. For
example, you may have multiple detectors on one lane and want them to be shown within the same
report. In addition, an “Email” setting is available for the XT-1. Setting this value to “Yes” allows for
timer data to be sent to an above store collection device. This feature is reserved for future use.
Day Part Names
Perform the following procedure to change the Day Part Names:
3. Enter the timer configuration menu, see above.
 4. Select 4 Customize Names > 3 Day Part Names .
Day parts are customized blocks of time that can overlap with shifts. Examples of day
part names could be Breakfast, Lunch, Dinner, and Late Night. First customize the
Day Part names, then assign the time periods using Time Denitions .
Shift Names
Perform the following procedure to change the Shift Names:
1. Enter the timer configuration menu, see above.
2. Select 4 Customize Names > 4 Shift Names .
Shifts are customized blocks of time that can overlap with day parts. Examples of day
part names could be First, Second, Third, or Day Shift and Night Shift. First customize
the Shift names, then assign the time periods using Time Denitions .
Setting up Time Reports
To set up your own time reports you need to define some or all of the following parameters:
 • GoalTimes
 • ValidTimes
 • Timedenitions
Descriptions for each of the parameters are provided below. The basic procedure
for setting up the parameters is the same for all of them:
1. Enter the timer configuration menu, see above.
2. Locate the parameter you want to change.
3. Change the parameter to the new value.
Set Goal Times
Perform the following procedure to change the Goal Times:
1. Enter the timer configuration menu, see above.