3M XT-1 - Order Point, Lane, and Detector Settings

3M™ Wireless Communication System Model XT-1
Store Manager Operating Instructions
November 2011 - Revision 1.8
Page 17 of 65
Configuration
Customer Order Point Prompt Language
Perform the following procedure to select the language(s) of the store closed and pull ahead prompts.
The prompts can be spoken in English, Spanish, French, German, or repeated in multiple languages:
 • Enterthebasestationcongurationmode,seepage5.
 • Changethevaluefor 07 Global Settings > Order Point
Prompts in English? to Yes or No .
 • PressEnter to implement the change or press Mode to abandon the
change and leave the option at its previous setting.
 • Changethevaluefor 07 Global Settings > Order Point
Prompts in Spanish? to Yes or No .
 • PressEnter to implement the change or press Mode to abandon the
change and leave the option at its previous setting.
 • Changethevaluefor 07 Global Settings > Order
Point Prompts in French? to Yes or No .
 • PressEnter to implement the change or press Mode to abandon the
change and leave the option at its previous setting.
 • Changethevaluefor 07 Global Settings > Order
Point Prompts in German? to Yes or No .
Order Point TALK with No Vehicle
Perform the following procedure to permit or prevent the order taker
to talk to the order point when no vehicle is detected.
 • Enterthebasestationuserservicemode,seepage5.
 • Changethevaluefor 07 Global Settings > Order Point
TALK With No Vehicle? to Yes or No .
Order Takers and Page Messages in Cross Lane Mode
In systems with two customer order points, in cross lane mode, you must specify the number of order takers
you will be using to make sure that non-order takers can hear orders being taken on one or both lanes. Similarly,
you must specify whether you want page messages to be heard by all headsets or only within each lane.
Perform the following procedure to specify the number of order takers in cross lane mode.
 • Enterthebasestationcongurationmode,seepage5.
 • Changethevaluefor 07 Global Settings > Order
Takers in CROSS Lane Mode? to 1 or 2 .
  • Ifyouselect1,non-ordertakerswillheartheordersfromlanes1and2.
  • Ifyouselect2,non-ordertakerswillhearonlytheorderson
the lane for which the headset is configured.