3M XT-1 - LED Detector Indicators; Percent Attained to Goal; Global Settings

3M™ Wireless Communication System Model XT-1
Store Manager Operating Instructions
November 2011 - Revision 1.8
Page 62 of 65
Appendix: Timer Module
 • IfLane1isselected,therunningtimestartscountingwhenthevehiclearrivesatOrderPoint1and
stops when the vehicle leaves the Pickup Window (or stops if the vehicle is considered a drive-off).
When the vehicle has completed the transaction selected, the running time starts counting for the next vehicle
in line, starting from the current running time which is accumulating in the background for each car in the
drive-thru. The time on the remote display only stops counting when there are no more cars in the drive-thru.
In one special display mode (Group1 & 2), an indicator on the last digit is used to specify whether the running
time represents a vehicle from Lane 1 or Lane 2. This mode is only valid in a 2MP_Y_Merge configuration.
Note:
The remote display can be configured to display the current running time in minutes and
seconds (m:ss), or seconds only (sss).
Percent Attained to Goal
The percent attained to goal field has two selections. First, specify
which detector point or report group is displayed.
 • Anyofthe6DetectorInputs,or
 • Anyofthe6ReportGroups,or
 • Thegreetevent
Second, specify which time period is used to calculate the value from the following:
 • FullDay,or
 • Anyofthe8DayParts,or
 • Anyof4Shifts.
LED Detector Indicators
Theremotetimerdisplaycomeswith6LEDindicatorlightsmappedtothe6detectorinputs.Ausermay
configure each LED to represent a different detector input. Each indicator is unique, so each detector
inputcanonlybeassignedonce.LED1istheleftmostindicatorandLED6therightmostindicator.
Global Settings
Perform the following procedure to change the Global Settings:
1. Enter the timer configuration menu, see above.
5. Select 6 Congure Timer > 6 Global Settings .
Several system parameters have been gathered under this heading. They include
  • IdleTimeBeforeResync
  • PointtoPointIdleTime
  • 4differentEmailTriggers(Forfutureuse)
  • SystemConguration(DescribedinsectionDrive-ThruTemplate)