3M XT-1 - Page 71

3M™ Wireless Communication System Model XT-1
Store Manager Operating Instructions
November 2011 - Revision 1.8
Page 65 of 65
Appendix: Timer Module
Total = 0117
The total number of vehicles counted in the
data summary for the current time period.
Except = 0015
The number of vehicles removed from
the data summary for the current period.
Typically Drive-on or Drive-off cars.
OrderPoint_1
The name of the input source for which the report
datapertains.Thiscanbeanyofthe6detectors,
GreetEvent,oranyofthe6reportgroups.
AVG.
1:25
The average time of the input source
(in this case, OrderPoint1 ) currently
displayed over the time period selected.
GOAL
1:00
The goal time of the input source (in this
case, OrderPoint1 ) currently displayed.
OVER
0031
Total number of vehicle times that
have exceeded the goal time.
Attained
079.05%
Percentage of vehicle times meeting
the goal time. (Total-Over)/Total
When viewing the Timer Report screen, pressing the Service key on the keypad rotates
between all Report Groups configured for the Timer System. The name field, located under
the date, will advance to the next Report Group, and the timer data values re-calculate.
If there are no points assigned to a Report Group, it is skipped in the rotation.
When viewing the Timer Report screen, pressing the Up or Down arrows rotates between
all point defined in the selected Report Group. For example, if the store is configured for a
2MP_Y-Merge configuration, and Lane 1 is the Report Group selected, the rotation would be:
 • GroupTotal
 • OrderPoint1
 • PayWindow
 • PickupWin
 • GreetEvent
 • GroupTotal