Aprisa LTE User Manual 2.1
DHCP Client > General Setup
This page configures the setup of a DHCP Client interface.
Protocol
This parameter allows changing the Protocol for this logical interface. If you want to switch protocols, select
the desired one from the drop down list, then click the ‘Switch protocol’ button when prompted with ‘Really
switch protocol?’. The default setting is DHCP Client.
Allows assignment of one or more IPv4 and/or IPv6 static
addresses, along with manual configuration of default gateway.
Allows automatic configuration of IPv4 address, netmask, gateway
and DNS servers through the DHCP protocol.
Allows automatic configuration of IPv6 from any combination of
stateless DHCPv6, stateful DHCPv6, DHCPv6-PD and SLAAC.
Hostname to send when requesting DHCP
If it is blank (default) then the hostname set in Terminal > Device > Hostname will be used.
To Next Page
Loading...
