Aprisa LTE User Manual 2.1
Compliance General
The Aprisa LTE router operates within frequency bands that are controlled through spectrum license
managed by the carriers
. Devices using these frequencies must meet the regional regulatory requirements
in addition to any requirements put in place by the carriers.
It is the responsibility of the user, before operating the equipment, to ensure that where required the
appropriate regulatory and regional carrier requirements have been met.
Changes or modifications not approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Equipment authorizations sought by 4RF are based on the Aprisa LTE router being installed at a fixed
restricted access location and operated within the environmental profiles defined in Table 1; operation
outside these criteria may invalidate the authorizations and / or license conditions.
Table 1 General Compliance
Storage: EN 300 019-1-1 Class 1.2
Transportation: EN 300 019-1-2 Class 2.3
Stationary use: EN 300 019-1-3 Class 3.3
Mobile use: EN 300 019-1-5 Class 5.1
ISO 7637-2, ISO 16750-2 (12V Code D 24V Code E)
Shock & Vibration: SAE J1455
UL 62368-1, Class 1 division 2, Groups ABCD for
hazardous locations
The carriers are the mobile phone carriers such as Verizon, AT&T, Vodafone etc.
To Next Page
Loading...
