4RF Aprisa LTE - Page 49

LTE Router Installation | 49
Aprisa LTE User Manual 2.1
CLI Software Upgrade Method
The LTE software can be upgraded from the Command Line Interface.
To load and activate Aprisa LTE software from a remote FTP server:
1. Open the CLI interface (see ‘Command Line Interface’ on page 226).
2. Type:
copy ftp://username:password@server-ip-or-name/file-path-and-name flash:active-firmware
To load (and activate later) Aprisa LTE software from a remote FTP server:
1. Open the CLI interface (see ‘Command Line Interface’ on page 226).
2. Type:
copy ftp://username:password@server-ip-or-name/file-path-and-name flash:available-firmware
To activate already loaded Aprisa LTE software:
1. Open the CLI interface (see ‘Command Line Interface’ on page 226).
2. Type:
copy flash:available-firmware flash:active-firmware
Software Downgrade
Aprisa LTE software can also be downgraded if required. The downgrade process is the same as the upgrade
process.