86 | Aprisa LTE User Manual
Initial Scan Timeout (s)
This parameter sets the timeout to wait for a successful connection after switching to a new PDN network
profile. If this times out with unsuccessful connection, then next lower priority PDN profile is used. If there
are no lower priority PDNs, then first (highest priority) PDN profile is used. The idle scan timeout value is
unlimited. The default value is 120 seconds (2 minutes).
Revert Mode
This parameter controls which PDN profile to select when attempting to revert to a PDN network profile:
First PDN, or Previous PDN.
Controls
Start button – starts the heath check.
To Next Page
Loading...
