Aastra 6757 - Programming a personal abbreviated number

Directories of abbreviated numbers
40
Directories of abbreviated numbers
These are directories stored at the system level.
• The personal directory is used to record your most frequently used numbers
(up to 10, numbered from 0 to 9).
• The group directory of abbreviated numbers can be accessed by all the phones
(even those for which outside access is forbidden).
Programming a personal abbreviated number
You want to program a number:
1 - Press the Tools key.
-> The display shows "PROGRAMMING".
2 - Press the
OK key.
-> The display shows WHAT DO YOU WANT TO
PROGRAM?
3 - Press the interactive Abbrev#. key.
-> The display shows the programming status of the number 0.
-> Press successively the interactive More key to display the
status of the other abbreviated numbers.
4 - Press the interactive Activ. key.
-> The display prompts you to dial the number to be programmed.
5 - Dial the party's number (preceded by 0 for an outside party).
-> In case of an error, press the interactive Erase key.
Reminder: Use the red key to cancel or terminate a
sequence.
6 - Press the interactive Enter key to finish.
-> The display shows the stored number.
To record a new sequence,
-> press the interactive More key.
To display the first number,
-> press the interactive Content key.
Abbrev#
More
Activ.
Enter
More
Content