Filter function
83
Communicating with the filter function
You have programmed the keys for use of the filtering function.
To activate the filter function:
The key programmed with the filter function is used to activate
filtering from the filtered phone or the filtering phone.
• Press the key programmed for filtering.
-> The indicator associated to the programmed key lights up on
the filtered and filtering phones.
-> An audible message and the display indicate that the action
has been validated on the filtered phone.
YOUR ARE FILTERING
To call the filtered phone:
You want to call the designated user of the filtered phone:
• Press the key programmed for supervision.
-> The indicator associated to the programmed key lights up.
To answer the filtered calls:
An inbound call for the filtered phone arrives. The display
indicates that the call was intended for the filtered phone:
• Pick up the handset or press the green key.
To transfer the inbound call to the filtered phone:
You are in communication with a party and you want to transfer
the call to the filtered phone:
• Press the key programmed for supervision and then the
interactive Transf. key (or simply hang up the handset or press
the red key .
-> The indicator associated to the programmed key lights up.
YOU ARE FILTERED
To call the filtering phone:
You want to call the designated user of the filtering phone:
• Press the key programmed for supervision.
-> The indicator associated to the programmed key lights up.
To Next Page
Loading...
