Multi-line function
73
Communicating with the multi-line function
The multi-line function has been stored on at least two programmable keys on your phone.
To answer a call:
When a call arrives on your phone that is multi-line programmed,
the indicator associated to the personalized key flashes.
• Press the programmed key to talk to the party.
-> The indicator associated to this key stays permanently on. The
display shows the calling party's identity.
To answer a second call:
If another party tries to reach you on the second line, you will hear
a beep and the indicator of a second key flashes.
1 - Press the interactive Wait key to display the caller’s identity.
If you do not want to answer,
• press the interactive Divert key,
• then dial the number of the phone to which you want to divert the
call.
2 - Press the interactive Answer key.
You can also press the programmed key associated with the
flashing indicator.
While in communication with the second party,
-> the indicator associated to that key lights up steady, and the
identity of the party is display on the screen while the call is in
progress.
The other party is put on hold.
-> The indicator associated to this key flashes rapidly.
To Next Page
Loading...
