"Do not disturb" function
90
"Do not disturb" function
You may wish not to be disturbed for a certain time and not receive any calls.
Using the "Do not disturb" function
*
To activate the function:
Phone in standby mode:
1 - Press the interactive Funct. key.
-> The display prompts you to choose a service.
2 - Press the interactive Feature key.
3 - Press the interactive --> key.
4 - Press the interactive D.N.D key
-> The display asks "
YOU DO NOT WANT TO BE
DISTURBED?".
5 - Press the interactive Activ. key to finish.
-> The display shows as a reminder "
YOU HAVE ASKED NOT
TO BE DISTURBED".
-> You no longer receive any calls.
To deactivate the function:
With the phone in standby, the display shows "YOU HAVE
ASKED NOT TO BE DISTURBED
"
• Press the interactive Cancel key.
-> An audible signal and the display indicate that the action has
been validated.
You want to receive calls again.
* Depending on the programming performed by the system operator.