Aastra 6757 - The identity presentation function

Other functions
94
The identity presentation function
*
You can choose the identity which you want to be shown to the party you are calling. You
have the choice between the number of your company, the number of your phone or no
number at all.
Notification function
This function (also accessible upon a call, See "Notifying the party" on page 19.) allows the
transmission of a short message to a contact, provided that the contact is connected to a
digital interface
* Depending on the programming performed by the system operator.
After having dialled the outside line access code,
1 - Press the interactive Option key.
-> The display offers three types of identity: Phone - Company -
None.
2 - Press the interactive key that corresponds to your choice
(example: Company).
-> Your choice is confirmed on the screen.
You can now dial the party's number.
Note: The validated choice only applies for the following call.
When no choice is defined, the identity programmed by the
system operator is shown.
Phone in standby
1 - Press the interactive Funct. key, then the interactive (-->)
Notify key.
2 - Dial the number of the party you want to alert, then press the
interactive Enter key.
-> The display shows the first of the six predefined messages.
3 - Press successively the interactive More key to select another
predefined message if you want to.
• Depending on your choice, you have to complete the message
displayed, or enter a free message text on the alphanumeric
keypad.
-> You can now dial the party's number.
Option
Company
Funct.
Notify
Enter
More