Aastra 6757 - Programming the Do not disturb function on a programmable key

"Do not disturb" function
91
Overriding the "Do not disturb" function
*
You are trying to reach a party who has programmed the "Do not disturb" function on his
phone. You can force this forwarding and ring the desired phone.
Programming the "Do not disturb" function on a
programmable key
If this function is repetitive, you can store it on a programmable key.
* Depending on the programming performed by the system operator.
* 2 9
1 - Press successively the * 2 9 keys before dialling the number
of the desired phone.
1 - Press the Tools key.
-> The display shows "
PROGRAMMING".
2 - Press
OK.
-> The display shows
WHAT DO YOU WANT TO
PROGRAM?
3 - Press a programmable key.
4 - Press the interactive Modify key.
5 - Press the interactive Feature key.
6 - Press the interactive --> key.
7 - Press the interactive D.N.D key
To activate the function:
You want to activate the "Do not disturb" function:
• Press the programmed key.
-> An audible message and the display indicate that the action
has been validated.
The indicator associated to the programmed key lights up.
You no longer receive any calls.
Modify
Feature
-->
D.N.D