Multi-line function
71
Caution!
Your system operator has just programmed the multi-line function on your phone.
You can use the features assigned to your phone by assigning them to the directory num-
7 - Press the interactive Extens. key.
-> The display suggests to supervise your phone or another phone.
8 - Press the interactive Me key to supervise your phone.
-> The display shows how many keys are already programmed in
supervision mode for this directory number.
9 - Press the interactive Add key to validate the new programming.
-> The programming of the key is confirmed in the display.
10 - Press the interactive <-Start key (to repeat the procedure for
the second directory number).
11 - Press another programmable key.
-> The display shows the programming status of the key.
12 - Press the interactive Modify key.
13 - Press the interactive Superv. key.
14 - Press the interactive Extens. key.
15 - Press the interactive Me key to supervise your phone.
-> The display shows how many keys are already programmed in
supervision mode for the first directory number.
16 - Press the interactive Add key to validate the new
programming.
-> The programming of the key is confirmed in the display.
Reminder: Use the red key to cancel a setting or return to
standby.
To Next Page
Loading...
