Aastra Ascotel IntelliGate A150 - Page 103

System Functions and Features as of I7.9
Routing elements 103
syd-0200/3.0 – I7.9 – 11.2009
All the elements can be connected to each user group in the user group configu-
ration (see Tab. 23, page 103 ).
Tab. 23 How user group elements are connected
Note:
If the element Operator Console or General Bell is connected without an
Operator Console or General Bell actually being connected, calls to this
destination will simply idle.
Fig. 43 Elements in a user group
Call Distribution to the Elements
A call is distributed in parallel to the connected elements of a user group. Each ele-
ment can be individually delayed. The delay time can be set globally to 3, 5 or 7
ringing cycles and applies throughout the system to all line groups.
Element Added on by:
Member group Entering at least one user as member of the group
Operator Console Connect [yes / no]
General Bell Connect [yes / no]
0OFPSNPSFVTFSTXJUIPOF
PSNPSFUFSNJOBMTFBDI
0QFSBUPS$POTPMF
(FOFSBMCFMM
6TFS
HSPVQ