System Functions and Features as of I7.9
218 Call routing
syd-0200/3.0 – I7.9 – 11.2009
Tab. 75 Settings for PINX 2 routing parameters
Tab. 76 Settings for PINX 1 routing parameters
Phone number with an exchange access prefix
If the phone number has an exchange access prefix without route information (ex-
change access Business, Private, cost centre selection), the call will be routed on via
the transit route.
Parameter Parameter value
Route 1:
• Trunk groups 1 (reference number of one or more trunk group(s))
• Numbering plan identifier NPI E.164
• Type of number TON Unknown
• Send access code –
Trunk group 1:
• Network interfaces Network interfaces of this trunk group
• Network type Private
• Protocol PSS1 (QSIG)
Parameter Parameter value
Basic setup PISN:
• Transit route: 1 (route reference number for transit calls to the public network)
Route 1:
• Trunk groups 3 (reference number of one or more trunk group(s))
• Digit barring Use or do not use digit barring
• Outgoing connections Number of connections allowed simultaneously
• Numbering plan identifier NPI E.164
• Type of number TON Unknown
• Send access code –
Trunk group 1:
• Network interfaces Network interfaces of this trunk group
• Network type Public
• Protocol DSS1
To Next Page
Loading...
