System Functions and Features as of I7.9
Call logging (CL) 273
syd-0200/3.0 – I7.9 – 11.2009
Caller identification 1 and caller identification 2
These fields have a different meaning depending on the direction (incoming or
outgoing calls).
• Caller identification 1, incoming:
The number which the calling user wants to present to the called user is entered
here. This number is displayed as CLIP on system terminals.
• Caller identification 2, incoming:
A call number from the calling user that has been verified by the network pro-
vider and found to be valid is entered here.
Fig. 134 Caller identification incoming
• Caller identification 1, outgoing:
On the OCL report at the gateway/transit PINX: The user call number valid within
the network is entered here.
On the OCL report at the source PINX no number is entered in this field.
• Caller identification 2, outgoing:
On the OCL report at the source/transit PINX: The user call number valid within
the PISN is entered here.
On the OCL report at the gateway PINX: The user’s DDI number is entered here.
On a stand-alone PBX the entries are output analogue to a source PINX.
PBX
PINX 1
PINX 2
032 624 33 00
032 624 33 99
Master No.
032 624 33 00
Caller ID1: 0848 80 24 4
Caller ID2: 032 624 33 0
Caller ID1: 0848 80 24 4
Caller ID2: 032 624 33 0
Call
Logging
PC
Call
Logging
PC
DDI:54
CLIP on exchange
0848 80 24 44
haz0606aaena0
To Next Page
Loading...
