System Functions and Features as of I7.9
Features 493
syd-0200/3.0 – I7.9 – 11.2009
Phone booth operation, variant 2
Guest user 45 contacts Reception because he wants to make a phone call.
Fig. 225 Signalling on the Operator Console with variant 2 of phone booth operation
The guest in the phone box picks up the receiver within 2 minutes and obtains a
dial tone. The line is signalled as "busy" on the Operator Console.
Operating sequence on the Operator Console:
• Press phone box key (*3245 configured)
• Press Enter key
• Press the End key
When the call in the phone box is completed the charge recall signal rings on the
Operator Console and the call charge information is displayed in the same way as
in variant 1 (possibly with a delay depending on the configuration).
*$BMMGSPNQIPOFCPPUI/P
*$BMMUPQIPOFCPPUI/P
-JOFLFZ@@@@@@@@@@@@@@@@@P@@
5)64&1
&ORVJSZDBMM%5.'1BSL.FTTBHF
haz1248aaena0